Art Of Sharpening

Home › How We Test

How we test

How We Test (and What We Haven’t Tested Yet)

Every sharpener on this site carries one of two labels. Hands-on tested means we’ve used it on real knives. Research-based pick means we haven’t yet, and we’ll show you exactly how we chose it. This page explains both, tells you where we are with testing, and how we earn.

In short

We only say “we tested” when we’ve used a sharpener ourselves, on knives we name. Everything else is labeled research-based, built from makers’ specs, owner reports and how it suits each knife’s angle and steel. We earn through Amazon links, and that never changes what we recommend.

What our labels mean

Hands-on testedResearch-based pick
What it meansWe’ve used this sharpener ourselvesWe haven’t used it yet
What you’ll see on the pageThe knives and steels we used it on, what happened, photos from our bench, and what went wrongThe specs we checked, where they came from, which knives it suits, and why we picked it
Where the facts come fromOur own use, plus the maker’s specsThe maker’s own pages first; retailer listings or owner reports only when labeled as such
Can it change?Yes, if a longer test changes our viewYes: when we buy and test it, the label changes and we say what changed

We’d rather tell you we haven’t tested something than pretend we have.

Where we are with testing

Right now, every pick on the site is labeled Research-based pick. We haven’t finished a hands-on test we’re ready to publish, so we don’t claim one.

What we’re buying next: the sharpeners people ask about most, guided systems first, starting with the Work Sharp Precision Adjust and the Spyderco Sharpmaker. We’ll buy knives in different steels at the same time, so we can show how each steel sharpens on each system. As each test is done, the label on that product changes and the page gets a short “What changed” note.

How we test a sharpener hands-on

When we test a sharpener, we follow the same steps every time, so results can be compared across systems and steels. This is our method; results only appear on a page once we’ve actually run it.

StepWhat we doWhat we record
1. Set upUnbox it, read the manual, set it up as the maker intendsWhat’s in the box vs sold separately; setup time; anything confusing
2. Check the angleColor the bevel with a marker and compare the system’s angle to the knife’s factory edgeWhether it matches the maker’s published angle
3. Sharpen a dull knifeStart from a knife that won’t cut paperRoughly how long to raise a burr along the whole edge; which grits we used
4. Test the edgeSimple, repeatable checks: paper slicing, a ripe tomato, push-cutsPass or fail on each, in plain words. No invented “sharpness scores”
5. Repeat on other steelsThe same knife types in different steels (for example, a softer stainless and a hard super steel)How the time and result change by steel. Almost nobody else records this
6. Live with itUse it for touch-ups over the following weeksHow easy it is to maintain an edge; what wears out
7. Write it upShort answer first, then the detailWhat it does well, where it struggles, which knives it’s safe for and not for, and what we’d buy instead

What we don’t do

  • We don’t use lab equipment or a sharpness tester, so we don’t publish sharpness numbers. If that changes, we’ll explain the method here first.
  • We don’t give star ratings. We’d rather tell you who a sharpener suits and who it doesn’t.
  • We don’t reuse Amazon’s star ratings or reviews as our own.

How we choose a research-based pick

  1. 1

    Start with the knife

    Which knives and steels will people use it on? Which angles do their makers publish? (Find your knife’s angle)

  2. 2

    Check the specs at the source

    Angle range, abrasives, what’s in the box, from the maker’s own page. If we can only find a figure on a retailer’s page, we say so, or leave it out.

  3. 3

    Match it to the knife

    Can it reach the angle? Can its abrasives cut the steel? This is where we write the Safe for / Not for line.

  4. 4

    Read the owners

    Long-term owner reports and community discussion for common problems. We summarize themes; we never present them as our own experience or as testimonials.

  5. 5

    Pick for who it suits

    Every pick is “best for” someone, not “best ever”.

How we earn (and what that doesn’t change)

Art of Sharpening earns a small commission when you buy through our Amazon links, at no extra cost to you. As an Amazon Associate, Art of Sharpening earns from qualifying purchases.

  • We don’t rank products by commission
  • We recommend products people will enjoy, actually use, and keep for years
  • We’ll tell you when you don’t need to buy anything at all
  • We don’t accept payment for placement or reviews

Free products: we buy what we test ourselves. If we ever accept a product from a brand, we’ll say so on the review, and it won’t change the label or the verdict.

Read our full affiliate disclosure →

Sources, updates and corrections

  • Sources: angle, grit and spec figures come from makers’ own published guidance. Where a figure comes from a retailer or an owner report, the page says so.
  • Last updated: every guide and roundup shows when we last checked it.
  • When we test a research-based pick: we update the page, switch the label, and add a short “What changed” note.
  • Corrections: spotted something wrong? Tell us. We’ll fix it and note the change on the page.

What we don’t claim

We don’t hold a professional sharpening qualification, and we’re not a lab. We’re not chefs, and we don’t run a sharpening service. What we do have is a lot of reading, a clear method, and a rule we don’t break: if we haven’t tested it, we say so.

Find the right sharpener for your knives

Every pick is matched to the knives it’s safe for, and labeled honestly.

Questions about how we test? Send us a message →

Scroll to Top